Free tool · ISA arborist exam · Tree Risk
Tree height calculator
Measure a tree with a clinometer, a phone app or a stick. Enter your readings to get the height and the striking distance if the tree fails.
Tree height
56.7 ft
17.3 m
Target zone if the whole tree fails
- 1 × height
- 56.7 ft
- 1.5 × height
- 85 ft
The zones ISA’s basic tree risk assessment form uses to record where targets are. An estimate, not a site assessment.
How to measure tree height with a clinometer
The tangent method is the most widely used way to measure tree height, by professionals and amateurs alike. You need a tape or rangefinder for the distance and a clinometer for the angles; a phone clinometer app works.
- Stand where you can see both the top and the base of the tree.
- Measure the horizontal distance from your eye to the trunk.
- Read the angle to the highest twig.
- Read the angle to the base of the trunk. It is negative if the base is below your eye.
- Height = distance × (tan top angle − tan base angle).
The American Forests measuring handbook gives this example: at 125 feet, with 37.5° to the top and −8.7° to the base, the tree is 115 feet tall. Enter those numbers above to check. With a percent-scale clinometer, height = distance × (top reading − base reading) ÷ 100, so at exactly 100 feet you can add the two readings in your head.
The stick method
No clinometer? Hold a stick upright at arm’s length and walk until the part above your hand just covers the tree from base to top. Measure the stick above your hand, the distance from your eye to your hand, and the distance from your eye to the base of the tree. The two triangles have the same shape, so height = eye-to-base distance × stick length ÷ eye-to-hand distance. In the handbook’s example, 120 feet × 2.7 ÷ 2.5 gives a 129.6-foot tree.
Where height measurements go wrong
- The top is not above the base. On a leaning tree or a wide crown, the highest twig can be well off to one side. Measure the horizontal distance to the spot on the ground under the top, not to the trunk.
- Sloping distance. The formula needs the horizontal distance. A tape laid along a slope overstates it.
- Mistaking a side branch for the top. Move around the tree until you are sure you can see the highest point.
- A stick that isn’t vertical. Tilt throws off the stick method; a small plumb weight on a string helps.
The handbook calls the sine method, done with a laser rangefinder, the most accurate way to measure height.
Tree height in tree risk assessment
ISA’s basic tree risk assessment form records each target’s distance as within the drip line, within 1 times the tree’s height, within 1.5 times, or beyond. At 1.5 times height, a target is within striking distance if the trunk or roots fail and dead or brittle branches shatter and fly from the fallen tree. Tree Risk is 11% of the ISA Certified Arborist® exam; the free practice test includes it.
Test yourself: an exam-style question
A “failure zone” is defined as:
- The area where a tree assessor stands during evaluation
- The zone that a failing tree part is likely to impact upon falling
- The portion of a stem containing active decay
- The area beneath a tree where targets are concentrated
Show answer
B. The zone that a failing tree part is likely to impact upon falling
The failure zone is the area a failed tree part is likely to hit. Its size depends on the size, height and direction of fall of that part. For whole-tree failure, ISA’s basic tree risk assessment form looks out to 1.5 times the tree’s height, which is why height is one of the first things you measure.
Questions like this come up in the Tree Risk domain of the ISA Certified Arborist® exam.The 963 questions in the app each come with a written explanation.
FAQ
- What is the formula for tree height with a clinometer?
- Height = horizontal distance to the trunk × (tangent of the angle to the top − tangent of the angle to the base). Angles below eye level are negative, so on flat ground the base reading adds to the height. With a percent clinometer, height = distance × (top % − base %) ÷ 100.
- How can I measure a tree’s height without a clinometer?
- Use the stick method. Hold a stick upright at arm’s length and move until the part above your hand just covers the tree. Then height = (distance from your eye to the base of the tree × stick length above your hand) ÷ distance from your eye to your hand.
- Why is my tree height measurement wrong?
- The most common cause is a top that is not directly above the base, on a leaning tree or one with a wide crown. Measure the horizontal distance to the spot on the ground under the highest twig, not to the trunk. Also make sure the distance is horizontal, not along a slope.
- Why do arborists measure tree height?
- Height goes into tree inventories alongside species, DBH, crown spread and condition. In tree risk assessment it sets the target zone, and it matters when planning felling and rigging.
Sources
- American Forests. Champion Trees Measuring Guidelines Handbook
- ISA. Basic Tree Risk Assessment Form Instructions
Checked against these sources on October 30, 2026. For education and ISA Certified Arborist® exam preparation only, not a substitute for ANSI standards, local regulations or professional judgment. Everything runs in your browser; nothing you enter is sent anywhere.